700r4 line hookup
If you shorten the line hookup move it towards the adjuster tabthis raises both one pressure and shift point. However, remember that on the R4 and R Transmission the TV cable controls both shift feel clutch apply pressure and shift points, you therefore cannot alter one without altering the other.
There are usually provisions to hook up a conventional line hookup cable on the lefthand side of the extension housing, although on some models, a vehicle speed sensor VSS with an additional two-wire connector replaces the conventional speedometer drive and driven gears. Applicable to R, R4, and 4L60 non-E transmissions, the kits come with a cable and a mounting bracket that collectively achieve the desired straight pull, similar to a typical throttle-cable.
Testing will be done with the engine running. This means the transmission will always have the correct oil pressure and shift feel regardless of engine torque.
This time, I will use an electronic speedo. The TV cable on the R4 and R transmissions controls line pressure, shift points, shift feel, part throttle downshifts, and detent full throttle downshifts.
Depress the adjusting tab and move the slider back through the fitting away from the carburetor until it stops. In order to be able to post messages on the Hot Rod Forum: To correct this problem, try rerouting the cable.
Not just a simple kickdown cable like your TH analogue, the TV cable controls line pressure and shift points. For instance, in place of a of wrecking-yard or generic-universal TV cable that may not have the right pull angle or tension for your application, TCI offers what it calls an EZ-Shift Cable.
My radiator has a top and bottom connection for the trans lines Vehicle does not have a trans cooler.
Posting Quick Reply - Please Wait. Stall converter real world guidance: Thread Tools Show Printable Version.
A Carbureted 350? We find the answer
This is a direct fluid passage to the transmissions internal hydraulic pump. If it is damaged, replace the throttle lever and bracket assembly.
As the accelerator pedal is depressed and the throttle opens, the TV linkage relays the motion to the valve body's throttle plunger.